Patio heater without light for bars and cafes with power regulation and remote control
New infrared heater with power regulation at 4 power levels with remote control. Patio heater without light to medium wave terrace, ideal to place under pergolas and porches that provides a pleasant heat. The heater made of aluminum and highly efficient modern aesthetics. Lacquered finish in black color. It incorporates fixing to wall or ceiling. Comfort outdoors.
Technical characteristics of lightless patio heatersqith remote control
Without UV light
Silent operating system
Structure made of cast aluminum with ceramic coating on the back to avoid heat loss.
Waterproff IP 65 - for indoor and outdoor use (recommended under cover)
Power regulation by remote control.
Finish
Black satin lacquered extruded aluminum surface with heat-resistant paint, highly resistant to heat and degradation
Available sizes and powers. Heated area (m2) by the panel without light according to its placement
They are placed on the ceiling or on the wall at a height of 2.00m or higher (ideal height of 2.2m-2.5m), covering the tables, or the area to be heated. Exterior placement under cover.
Anchors included for wall or ceiling mounting
1500w 1048x177x100mm with power regulation with remote control
Indoors 3.8 m2
Protected exterior 2.9 m2 (terrace with side windscreens)
Exterior without protection 2.5m2 (open terrace on the sides)
1800w 1225x177x100mm with power regulation with remote control
Indoors 4.3 m2
Protected exterior 3.4 m2 (terrace with side windscreens)
Outside without protection 3m2 (open terrace on the sides)
2400w 1505x177x100mm with power regulation with remote control
Indoors 5.63 m2
Protected exterior 4.3 m2 (terrace with side windscreens)
Outside without protection 4m2 (open terrace on the sides)
3200w 1915x177x100mm with power regulation with remote control
Indoors 7.5 m2
Protected exterior 5.8 m2 (terrace with side windscreens)
Outdoor without protection 5.3m2 (open terrace on the sides)
Why should I buy a terrace heater without light at DESKandSIT?
35% performance What is the difference with electric heaters that emit infrared light orange?
This system, although it is slower to start and reach the desired temperature is maintained over time more stable and more efficiently, providing a yield higher 35% than other heaters class . Transforms 96% of the heat energy in medium wave, which is perfect for providing comfort in outdoor environments because the radiant heat is absorbed by the bodies and objects, rather than being lost in the air.
Operating sensors inside when the temperature reaches 320 ° C, switch off electricity and come back on when the temperature drops to 270 degrees.. This process takes about 4 minutes and continues to maintain optimal heating temperature so the cooling effect does not reach noted. This process is repeated continuously, for loa during 40% of the time does not consume energy, making this unique system in the world, the most economical heat outdoors. very high thermal inertia.
